FTX Series

FTX Series

High Force Electric Actuator

  • Hydraulic Cylinder Replacement
  • Long Stroke Lengths
  • High Speed and Long Life
  • Rugged and Reliable
Find a Distributor

Hydraulic Cylinder Replacement

Hydraulic cylinders provide long life and high force in a small package size. The FTX Series high force electric actuators were designed specifically to allow migration from traditional hydraulic actuation to electric. Based on planetary roller screw technology, the FTX offers life and force density not attainable with more common ball screw based electric actuators. With up to 15X the life and 2X the force density, the roller screw based FTX is the right choice when migrating from hydraulic to electric actuation.

Rugged and Reliable

Hydraulic cylinders are commonly installed in harsh industrial settings. Therefore all FTX Series models are environmentally sealed to IP65. In addition, its planetary roller screw mechanism withstands significantly higher shock loads than weaker ball screw alternatives. Migrate to electric with confidence knowing the FTX Series is every bit as rugged and reliable as the hydraulics they are designed to replace.

Minimal Maintenance

More and more machine builders are looking to eliminate the mess and downtime associated with hydraulic fluid leaks. Electric actuation not only eliminates the problems associated with fluid leaks, it offers significantly higher levels of performance and flexibility than is possible even with servo-hydraulic solutions. FTX Series roller screw actuators allow machine builders to meet the ever-increasing performance demands of their customers while minimizing or eliminating the maintenance issues associated with traditional hydraulic solutions.

 

Quick Data

Models: FTX095, FTX125, FTX160, FTX215
Frame Sizes: 95 mm (3.74 in), 125 mm (5 in), 160 mm (6.3 in) 215 mm (8.5 in)
Screw Leads – mm (in) 5 (.20), 6 (.25), 10 (.39), 12 (.50), 20 (.79), 30, (1.18)
Stroke Lengths: 150, 300, 600, 900 mm (5.9, 11.8, 23.6, 35.4 in )
Linear Speed: up to 1500 mm/sec (59 in/sec)
Maximum Force: up to 178 kN (40,000 lbf)
Standards/Ratings: IP65S

Related Industries

Configuration Options

FTX Series Configuration Options

AAA = FTX Frame Size
BBBB = Stroke Length
CC = Screw Lead
D = Lubrication Type
E = Rod End Thread
FFF = Motor Mounting Configurations
GGG = Motor Mounting Dimension Code
= Mounting Options
N = Other Options

Mechanical Options

Adjustable External Travel Switche(s)

External travel switches indicate travel to the controller and are adjustable for either the home or end position.

Front Mounting Flange

Front mounting flange, includes thru-holes for face-mounting

Rear Clevis, Metric

Rear clevis mount, allows actuator to pivot while in motion

Rear Eye Mount

Rear eye mount, allows actuator to pivot while in motion

Rear Trunnion Mount

A rear trunnion is a cylindrical protrusion used as a mounting or pivoting point.

* Some options are not available with every configuration. For options or specials not listed above or for extended temperature operation, please consult Exlar Applications Engineering.

IP Ratings for Exlar Actuators

FTX Series

FTX095
Performance Specifications
 Printable View

FTX095 Specifications

    5 10 20
Screw Lead mm 5 10 20
  in 0.197 0.394 0.787
Maximum Force* kN 22.2 22.2 22.2
  lbf 5,000 5,000 5,000
Life at Maximum Force km 392 626 1440
  in x 10^6 15.4 24.6 56.7
C_a (Dynamic Load Rating) kN 95.2 88.3 92.5
  lbf 21,400 19,850 20,800
Maximum Input Torque Nm 22.1 44.3 88.5
  lbf-in 196 392 783
Max Rated RPM @ Input Shaft RPM 4,500 4,500 4,500
Maximum Linear Speed @ Maximum Rated RPM mm/sec 373 750 1,500
  in/sec 14.7 29.5 59.3
Friction Torque Nm 1.12 1.12 1.12
  lbf-in 10 10 10

Intermediate and custom stroke lengths are also available. Belt and pulley inertia varies with ratio and motor selection. Please contact your local sales representative. 
* Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

 

FTX095 Inertias

Base Unit Inertia Zero Stroke [kg-m^2 (lbf-in-sec^2)] Add per 25 mm [kg-m^2 (lbf-in-sec^2)]  
—5 mm Lead 8.27 x 10^-4 (7.32 x 10^-3) 2.19 x 10^-6 (1.94 x 10^-5)  
—10 mm Lead 8.33 x 10^-4 (7.37 x 10^-3) 2.42 x 10^-6 (2.14 x 10^-5)  
—20 mm Lead 8.57 x 10^-4 (7.58 x 10^-3) 3.31 x 10^-6 (2.93 x 10^-5)  
       
Inline Drive Inertia Inline Unit - w/Motor Coupling Inline Unit - w/Motor Coupling For Gearbox Mount Add per 25 mm
—5 mm Lead 9.27 x 10^-4 (8.20 x 10^-3) 1.09 x 10^-3 (9.62 x 10^-3) 2.19 x 10^-6 (1.94 x 10^-5)
—10 mm Lead 9.33 x 10^-4 (8.26 X 10^-3) 1.09 x 10^-3 (9.67 x 10^-3) 2.42 x 10^-6 (2.14 x 10^-5)
—20 mm Lead 9.57 x 10^-4 (8.47 x 10^-3) 1.12 x 10^-3 (9.89 x 10^-3) 3.31 x 10^-6 (2.93 x 10^-5)
       
Parallel Drive Inertia 1:1 Reduction 2:1 Reduction  
—5 mm Lead (zero stroke) 4.90 x 10^-3 (4.34 x 10^-2) 2.22 x 10^-3 (1.97 x 10^-2)  
——Add per 25 mm stroke 2.19 x 10^-6 (1.94 x 10^-5) 5.48 x 10^-7 (4.85 x 10^-6)  
—10 mm Lead (zero stroke) 4.91 x 10^-3 (4.34 x 10^-2) 2.23 x 10^-3 (1.97 x 10^-2)  
——Add per 25 mm stroke 2.42 x 10^-6 (2.14 x 10^-5) 6.04 x 10^-7 (5.34 x 10^-6)  
—20 mm Lead (zero stroke) 4.93 x 10^-3 (4.37 x 10^-2) 2.23 x 10^-3 (1.98 x 10^-2)  
——Add per 25 mm stroke 3.31 x 10^-6 (2.93 x 10^-5) 8.28 x 10^-7 (7.33 x 10^-6)  

 

FTX095 Weights

  kg lb
Base Actuator Weight (Zero Stroke) 10 21
Actuator Weight Adder (Per 25 mm of stroke) 0.39 0.87
Adder for Inline (excluding motor) 2.9 6.5
Adder for Parallel Drive (excluding motor) 13.1 28.9
Adder for Front Flange 1.9 4.2
Adder for Rear Clevis 5.3 11.7
Adder for Rear Eye 5.1 11.3
Adder for Rear Trunnion 1.9 4.3
Estimated Life Time Curves
Ordering Guide
 Printable View

To order a product from Exlar, a unique model mask (identification number) is required. The model mask is a string of characters that identifies the model, size, and configuration alternatives.

 

 

Product Selection Guidelines

To facilitate your ordering process, feel free to print and complete this Exlar Application Worksheet, prior to contacting a Sales Representative in your area.

AAA = FTX Frame Size

095 = 95 mm (3.74 in)
125 = 125 mm (5 in)
160 = 160 mm (6.3 in)
215 = 215 mm (8.5 in)

BBBB = Stroke Length

0150 = 150 mm
0300 = 300 mm
0600 = 600 mm
0900 = 900 mm (FTX095, FTX125, FTX160)

CC = Screw Lead
FTX095 FTX125 FTX160 FTX215
05 = 5 mm 05 = 5 mm 06 = 6 mm 06 = 6 mm
10 = 10 mm 10 = 10 mm 12 = 12 mm 12 = 12 mm
20 = 20 mm   30 = 30 mm 30 = 30 mm
D = Lubrication Type

1 = Grease
2 = Oil

E = Rod End Thread

A = Male, metric thread
B = Female, metric thread

FFF = Motor Mounting Configurations

NMT = None, base unit only
N10 = Inline, includes shaft coupling
P10 = Parallel, 1:1 belt reduction
P20 = Parallel, 2:1 belt reduction

Always discuss your motor selection with your local sales representative.

GGG = Motor Mounting Dimension Code

NNN = None, base unit only

 

FTX095 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
68 60 16 48 5 GFA
75 60 16 48 5 GHA
165 130 28 60 8 IRB
165 130 32 58 10 IRC
165 130 32 50 10 IRD
145 110 28 63 8 JQA

 

FTX095 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
68 60 16 48 5 GFA
75 60 16 48 5 GHA
130 110 24 50 8 IPB
165 130 24 50 8 IRA
100 80 19 40 6 IMC
145 110 24 55 8 JQD

 


FTX125 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
120 90 32 88 10 G7A
200 114.3 42 113 10 JSD
215 130 32 60 10 ITE
215 180 38 80 10 ITF
215 180 42 82 12 IFG

 

FTX125 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
85 70 22 56 6 GIA
185 130 32 58 10 IRC
200 114.3 35 80 10 JSA

 


FTX160 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
120 90 32 88 10 G7A
130 110 32 68 10 GPA
165 130 40 112 12 GRA
215 180 38 80 10 ITF
235 200 55 116 16 JUA
265 230 42 110 12 IVC
265 230 55 110 16 JVA

 

FTX160 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
100 80 22 48 6 GMA
120 90 32 88 10 G7A
130 110 32 68 10 GPA
165 130 32 50 10 IRD
200 114.3 35 80 10 JSA
200 114.3 42 113 10 JSD
215 130 32 60 10 ITE
215 180 38 80 10 ITF
215 180 42 82 12 ITG
265 230 42 110 12 IVC

 


FTX215 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
215 160 55 112 16 GTA
265 230 42 110 12 IVC
265 230 60 140 18 JVC
300 250 48 112 14 IWA
300 250 60 140 18 JWA

 

FTX215 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
165 130 40 112 12 GRA
215 180 38 80 10 ITF
265 230 38 110 10 IVB
265 230 42 110 12 IVC
M = Mounting Options

N = None
1 = Front Mounting Flange
5 = Rear Clevis1
7 = Rear Eye1
9 = Rear Trunnion

1= Not available with inline or NMT motor mount, contact your local sales representative.

N = Other Options

N = None

FTX125
Performance Specifications
 Printable View

FTX125 Specifications

    5 10
Screw Lead mm 5 10
  in 0.197 0.394
Maximum Force* kN 44.5 44.5
  lbf 10,000 10,000
Life at Maximum Force km 249.2 486.3
  in x 10^6 9.81 19.14
C_a (Dynamic Load Rating) kN 163.7 162.4
  lbf 36,800 36,500
Maximum Input Torque Nm 46.5 82.3
  lbf-in 412 728
Max Rated RPM @ Input Shaft
 
RPM 3,500 3,500
Maximum Linear Speed @ Maximum Rated RPM mm/sec 292 583
  in/sec 11.5 23
Friction Torque Nm 2.23 2.23
  lbf-in 20 20

Intermediate and custom stroke lengths are also available. Belt and pulley inertia varies with ratio and motor selection. Please contact your local sales representative. 
* Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

 

FTX125 Weights

  kg lb
Base Actuator Weight (Zero Stroke) 21 47
Actuator Weight Adder (Per 25 mm of stroke) 0.84 1.85
Adder for Inline (excluding motor) 6.8 15
Adder for Parallel Drive (excluding motor) 25.6 56.5
Adder for Front Flange 3.6 7.9
Adder for Rear Clevis 6.5 14.3
Adder for Rear Eye 6.3 13.8
Adder for Rear Trunnion 3.1 6.8

 

FTX125 Inertias

Base Unit Inertia Zero Stroke [kg-m^2 (lb-in-s^2)] Add per 25 mm [kg-m^2 (lb-in-s^2)]  
—5 mm Lead 2.55 x 10^-3 (2.26 x 10^-2) 4.62 x 10^-5 (4.09 x 10^-4)  
—10 mm Lead 2.56 x 1^0-3 (2.27 x 10^-2) 4.65 x 10^-5 (4.12 x 10^-4)  
       
Inline Drive Inertia <32 mm Motor Shaft Diameter >32 mm Motor Shaft Diameter Add per 25 mm
—5 mm Lead 2.81 x 10^-3 (2.49 x 10^-2) 3.35 x 10^-3 (2.97 x 10^-2) 4.62 x 10^-5 (4.09 x 10^-4)
—10 mm Lead 2.82 x 10^-3 (2.50 x 10^-2) 3.36 x 10^-3 (2.98 x 10^-2) 4.65 x 10^-5 (4.12 x 10^-4)
       
Parallel Drive Inertia 1:1 Reduction 2:1 Reduction  
—5 mm Lead (zero stroke) 9.43 x 10^-3 (8.34 x 10^-2) 4.66 x 10-3 (4.12 x 10-2)  
——Add per 25 mm stroke 4.62 x 10^-5 (4.09 x 10^-4) 1.15 x 10^-5 (1.02 x 10^-4)  
—10 mm Lead (zero stroke) 9.44 x 10^-3 (8.35 x 10^-2) 4.66 x 10^-3 (4.13 x 10^-2)  
——Add per 25 mm stroke 4.65 x 10^-5 (4.12 x 10^-4) 1.16 x 10^-5 (1.03 x 10^-4)  
Estimated Life Time Curves
Ordering Guide
 Printable View

To order a product from Exlar, a unique model mask (identification number) is required. The model mask is a string of characters that identifies the model, size, and configuration alternatives.

 

 

Product Selection Guidelines

To facilitate your ordering process, feel free to print and complete this Exlar Application Worksheet, prior to contacting a Sales Representative in your area.

AAA = FTX Frame Size

095 = 95 mm (3.74 in)
125 = 125 mm (5 in)
160 = 160 mm (6.3 in)
215 = 215 mm (8.5 in)

BBBB = Stroke Length

0150 = 150 mm
0300 = 300 mm
0600 = 600 mm
0900 = 900 mm (FTX095, FTX125, FTX160)

CC = Screw Lead
FTX095 FTX125 FTX160 FTX215
05 = 5 mm 05 = 5 mm 06 = 6 mm 06 = 6 mm
10 = 10 mm 10 = 10 mm 12 = 12 mm 12 = 12 mm
20 = 20 mm   30 = 30 mm 30 = 30 mm
D = Lubrication Type

1 = Grease
2 = Oil

E = Rod End Thread

A = Male, metric thread
B = Female, metric thread

FFF = Motor Mounting Configurations

NMT = None, base unit only
N10 = Inline, includes shaft coupling
P10 = Parallel, 1:1 belt reduction
P20 = Parallel, 2:1 belt reduction

Always discuss your motor selection with your local sales representative.

GGG = Motor Mounting Dimension Code

NNN = None, base unit only

 

FTX095 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
68 60 16 48 5 GFA
75 60 16 48 5 GHA
165 130 28 60 8 IRB
165 130 32 58 10 IRC
165 130 32 50 10 IRD
145 110 28 63 8 JQA

 

FTX095 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
68 60 16 48 5 GFA
75 60 16 48 5 GHA
130 110 24 50 8 IPB
165 130 24 50 8 IRA
100 80 19 40 6 IMC
145 110 24 55 8 JQD

 


FTX125 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
120 90 32 88 10 G7A
200 114.3 42 113 10 JSD
215 130 32 60 10 ITE
215 180 38 80 10 ITF
215 180 42 82 12 IFG

 

FTX125 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
85 70 22 56 6 GIA
185 130 32 58 10 IRC
200 114.3 35 80 10 JSA

 


FTX160 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
120 90 32 88 10 G7A
130 110 32 68 10 GPA
165 130 40 112 12 GRA
215 180 38 80 10 ITF
235 200 55 116 16 JUA
265 230 42 110 12 IVC
265 230 55 110 16 JVA

 

FTX160 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
100 80 22 48 6 GMA
120 90 32 88 10 G7A
130 110 32 68 10 GPA
165 130 32 50 10 IRD
200 114.3 35 80 10 JSA
200 114.3 42 113 10 JSD
215 130 32 60 10 ITE
215 180 38 80 10 ITF
215 180 42 82 12 ITG
265 230 42 110 12 IVC

 


FTX215 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
215 160 55 112 16 GTA
265 230 42 110 12 IVC
265 230 60 140 18 JVC
300 250 48 112 14 IWA
300 250 60 140 18 JWA

 

FTX215 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
165 130 40 112 12 GRA
215 180 38 80 10 ITF
265 230 38 110 10 IVB
265 230 42 110 12 IVC
M = Mounting Options

N = None
1 = Front Mounting Flange
5 = Rear Clevis1
7 = Rear Eye1
9 = Rear Trunnion

1= Not available with inline or NMT motor mount, contact your local sales representative.

N = Other Options

N = None

FTX160
Performance Specifications
 Printable View

FTX160 Specifications

    6 12 30
Screw Lead mm 6 12 30
  in 0.236 0.472 1.181
Maximum Force* kN 89 89 89
  lbf 20,000 20,000 20,000
Life at Maximum Force km 154.9 416.6 358.9
  in x 10^6 6.1 16.4 21.2
C_a (Dynamic Load Rating) kN 263.7 290.0 233.0
  lbf 59,275 65,200 52,400
Maximum Input Torque Nm 106 212 531
  lbf-in 940 1,880 4,699
Max Rated RPM @ Input Shaft
 
RPM 2,000 2,000 2,000
Maximum Linear Speed @ Maximum Rated RPM mm/sec 201 401 1,000
  in/sec 7.9 15.8 39.0
Friction Torque Nm 4.54 4.54 4.54
  lbf-in 40 40 40

* Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

 

FTX160 Weights

  kg LB
Base Actuator Weight (Zero Stroke) 49 108
Actuator Weight Adder (Per 25 mm of stroke) 1.62 3.6
Adder for Inline (excluding motor) 14.2 31.5
Adder for Parallel Drive (excluding motor) 53.1 117.8
Adder for Front Flange 7.4 16.4
Adder for Rear Clevis 21.2 48.8
Adder for Rear Eye 22.4 49.7
Adder for Rear Trunnion 10.9 24.2

 

FTX160 Inertias

Base Unit Inertia Zero Stroke [kg-m^2 (lbf-in-sec^2)] Add per 25 mm [kg-m^2 (lbf-in-sec^2)]  
6 mm Lead 1.35 x 10^-2 (1.19 x 10^-1) 2.57 x 10^-4 (2.27 x 10^-3)  
12 mm Lead 1.35 x 10^-2 (1.20 x 10^-1) 2.58 x 10^-4 (2.28 x 10^-3)  
30 mm Lead 1.38 x 10^-2 (1.22 x 10^-1) 2.66 x 10^-4 (2.36 x 10^-3)  
Inline Drive Inertia <32 mm Motor Shaft Diameter >32 mm Motor Shaft Diameter Add per 25 mm
6 mm Lead 1.47 x 10^-2 (1.30 x 10^-1) 1.67 x 10^-2 (1.48 x 10^-1) 2.57x 10^-4 (2.27 x 10^-3)
12 mm Lead 1.47 x 10^-2 (1.30 x 10^-1) 1.68 x 10^-2 (1.49 x 10^-1) 2.58 x 10^-4 (2.28 x 10^-3)
30 mm Lead 1.50 x 10^-2 (1.33 x 10^-1) 1.71 x 10^-2 (1.51 x 10^-1) 2.66 x 10^-4 (2.36 x 10^-3)
Parallel Drive Inertia 1:1 Reduction 2:1 Reduction  
—6 mm Lead (zero stroke) 5.27 x 10^-2 (4.67 x 10^-1) 2.30 x 10^-2 (2.04 x 10^-1)  
——Add per 25 mm stroke 2.57 x 10^-4 (2.27 x 10^-3) 6.42 x 10^-5 (5.68 x 10^-4)  
—12 mm Lead (zero stroke) 5.28 x 10^-2 (4.67 x 10^-1) 2.30 x 10^-2 (2.04 x 10^-1)  
——Add per 25 mm stroke 2.58 x 10^-4 (2.28 x 10^-3) 6.45 x 10^-5 (5.71 x 10^-4)  
—30 mm Lead (zero stroke) 5.30 x 10^-2 (4.69 x 10^-1) 2.31 x 10^-2 (2.05 x 10^-1)  
——Add per 25 mm stroke 2.66 x 10^-4 (2.36 x 10^-3) 6.66 x 10^-5 (5.89 x 10^-4)  
Estimated Life Time Curves
Ordering Guide
 Printable View

To order a product from Exlar, a unique model mask (identification number) is required. The model mask is a string of characters that identifies the model, size, and configuration alternatives.

 

 

Product Selection Guidelines

To facilitate your ordering process, feel free to print and complete this Exlar Application Worksheet, prior to contacting a Sales Representative in your area.

AAA = FTX Frame Size

095 = 95 mm (3.74 in)
125 = 125 mm (5 in)
160 = 160 mm (6.3 in)
215 = 215 mm (8.5 in)

BBBB = Stroke Length

0150 = 150 mm
0300 = 300 mm
0600 = 600 mm
0900 = 900 mm (FTX095, FTX125, FTX160)

CC = Screw Lead
FTX095 FTX125 FTX160 FTX215
05 = 5 mm 05 = 5 mm 06 = 6 mm 06 = 6 mm
10 = 10 mm 10 = 10 mm 12 = 12 mm 12 = 12 mm
20 = 20 mm   30 = 30 mm 30 = 30 mm
D = Lubrication Type

1 = Grease
2 = Oil

E = Rod End Thread

A = Male, metric thread
B = Female, metric thread

FFF = Motor Mounting Configurations

NMT = None, base unit only
N10 = Inline, includes shaft coupling
P10 = Parallel, 1:1 belt reduction
P20 = Parallel, 2:1 belt reduction

Always discuss your motor selection with your local sales representative.

GGG = Motor Mounting Dimension Code

NNN = None, base unit only

 

FTX095 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
68 60 16 48 5 GFA
75 60 16 48 5 GHA
165 130 28 60 8 IRB
165 130 32 58 10 IRC
165 130 32 50 10 IRD
145 110 28 63 8 JQA

 

FTX095 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
68 60 16 48 5 GFA
75 60 16 48 5 GHA
130 110 24 50 8 IPB
165 130 24 50 8 IRA
100 80 19 40 6 IMC
145 110 24 55 8 JQD

 


FTX125 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
120 90 32 88 10 G7A
200 114.3 42 113 10 JSD
215 130 32 60 10 ITE
215 180 38 80 10 ITF
215 180 42 82 12 IFG

 

FTX125 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
85 70 22 56 6 GIA
185 130 32 58 10 IRC
200 114.3 35 80 10 JSA

 


FTX160 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
120 90 32 88 10 G7A
130 110 32 68 10 GPA
165 130 40 112 12 GRA
215 180 38 80 10 ITF
235 200 55 116 16 JUA
265 230 42 110 12 IVC
265 230 55 110 16 JVA

 

FTX160 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
100 80 22 48 6 GMA
120 90 32 88 10 G7A
130 110 32 68 10 GPA
165 130 32 50 10 IRD
200 114.3 35 80 10 JSA
200 114.3 42 113 10 JSD
215 130 32 60 10 ITE
215 180 38 80 10 ITF
215 180 42 82 12 ITG
265 230 42 110 12 IVC

 


FTX215 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
215 160 55 112 16 GTA
265 230 42 110 12 IVC
265 230 60 140 18 JVC
300 250 48 112 14 IWA
300 250 60 140 18 JWA

 

FTX215 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
165 130 40 112 12 GRA
215 180 38 80 10 ITF
265 230 38 110 10 IVB
265 230 42 110 12 IVC
M = Mounting Options

N = None
1 = Front Mounting Flange
5 = Rear Clevis1
7 = Rear Eye1
9 = Rear Trunnion

1= Not available with inline or NMT motor mount, contact your local sales representative.

N = Other Options

N = None

FTX215
Performance Specifications
 Printable View

FTX215 Specifications

    6 12 30
Screw Lead mm 6 12 30
  in 0.236 0.472 1.181
Maximum Force* kN 177.9 177.9 177.9
  lbf 40,000 40,000 40,000
Life at Maximum Force km 78.7 161.8 414.3
  in x 10^6 3.1 6.4 16.3
C_a (Dynamic Load Rating) kN 398 423 376
  lbf 89,500 95,200 84,700
Maximum Input Torque Nm 243 425 976
  lbf-in 2,148 3,760 8,642
Max Rated RPM @ Input Shaft
 
RPM 1,750 1,750 1,750
Maximum Linear Speed @ Maximum Rated RPM mm/sec 175 351 875
  in/sec 6.9 13.8 34.4
Friction Torque Nm 5.65 5.65 5.65
  lbf-in 50 50 50

*Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

 

FTX215 Weights

  kg lb
Base Actuator Weight (Zero Stroke) 103 227
Actuator Weight Adder (Per 25 mm of stroke) 2.70 5.96
Adder for Inline (excluding motor) 38.6 85.1
Adder for Parallel Drive (excluding motor) 62.3 137.3
Adder for Front Flange 26.7 58.8
Adder for Rear Clevis 32.5 71.6
Adder for Rear Eye 32.5 71.6
Adder for Rear Trunnion 9.6 212

 

FTX215 Inertias

Base Unit Inertia Zero Stroke [kg-m^2 (lbf-in-sec^2)] Add per 25 mm [kg-m^2 (lbf-in-sec^2)]
  6 mm Lead Add per 25 mm, 6 mm Lead
Base Unit - Input Drive Shaft Only 4.25 x 10^2 (3.76 x 10^1) 8.00 x 10^4 (7.08 x 10^3)
  12 mm Lead Add per 25 mm, 12 mm Lead
Base Unit - Input Drive Shaft Only 4.26 x 10^2 (3.77 x 10^1) 8.02 x 10^4 (7.10 x 10^3)
  30 mm Lead Add per 25 mm, 30 mm Lead
Base Unit - Input Drive Shaft Only 4.31 x 10^2 (3.82 x 10^1) 8.15 x 10^4 (7.21 x 10^3)
     
Inline Drive Inertia 6 mm Lead Add per 25 mm, 6 mm Lead
Inline Unit - w/Motor Coupling 4.43 x 10^2 (3.92 x 10^1) 8.00 x 10^4 (7.08 x 10^3)
Inline Unit - w/Motor Coupling >55mm Shaft Diameter 6.15 x 10^2 (5.44 x 10^1) 8.00 x 10^4 (7.08 x 10^3)
  12 mm Lead Add per 25 mm, 12 mm Lead
Inline Unit - w/Motor Coupling 4.44 x 10^2 (3.93 x 10^1) 8.02 x 10^4 (7.10 x 10^3)
Inline Unit - w/Motor Coupling >55mm Shaft Diameter 6.16 x 10^2 (5.45 x 10^1) 8.02 x 10^4 (7.10 x 10^3)
  30 mm Lead Add per 25 mm, 30 mm Lead
Inline Unit - w/Motor Coupling 4.49 x 10^2 (3.98 x 10^1) 8.15 x 10^4 (7.21 x 10^3)
Inline Unit - w/Motor Coupling >55mm Shaft Diameter 6.21 x 10^2 (5.50 x 10^1) 8.15 x 10^4 (7.21 x 10^3)
     
Parallel Drive Inertia 6 mm Lead Add per 25 mm, 6 mm Lead
1:1 Reduction Parallel Belt Drive 8.73 x 10^2 (7.72 x 10^1) 8.00 x 10^4 (7.08 x 10^3)
2:1 Reduction Parallel Belt Drive 3.14 x 10^2 (2.78 x 10^1) 2.00 x 10^4 (1.77 x 10^3)
  12 mm Lead Add per 25 mm, 12 mm Lead
1:1 Reduction Parallel Belt Drive 8.74 x 10^2 (7.73 x 10^1) 8.02 x 10^4 (7.10 x 10^3)
2:1 Reduction Parallel Belt Drive 3.14 x 10^2 (2.78 x 10^1) 2.01 x 10^4 (1.78 x 10^3)
  30 mm Lead Add per 25 mm, 30 mm Lead
1:1 Reduction Parallel Belt Drive 8.79 x 10^2 (7.78 x 10^1) 8.15 x 10^4 (7.21 x 10^3)
Estimated Life Time Curves
Ordering Guide
 Printable View

To order a product from Exlar, a unique model mask (identification number) is required. The model mask is a string of characters that identifies the model, size, and configuration alternatives.

 

 

Product Selection Guidelines

To facilitate your ordering process, feel free to print and complete this Exlar Application Worksheet, prior to contacting a Sales Representative in your area.

AAA = FTX Frame Size

095 = 95 mm (3.74 in)
125 = 125 mm (5 in)
160 = 160 mm (6.3 in)
215 = 215 mm (8.5 in)

BBBB = Stroke Length

0150 = 150 mm
0300 = 300 mm
0600 = 600 mm
0900 = 900 mm (FTX095, FTX125, FTX160)

CC = Screw Lead
FTX095 FTX125 FTX160 FTX215
05 = 5 mm 05 = 5 mm 06 = 6 mm 06 = 6 mm
10 = 10 mm 10 = 10 mm 12 = 12 mm 12 = 12 mm
20 = 20 mm   30 = 30 mm 30 = 30 mm
D = Lubrication Type

1 = Grease
2 = Oil

E = Rod End Thread

A = Male, metric thread
B = Female, metric thread

FFF = Motor Mounting Configurations

NMT = None, base unit only
N10 = Inline, includes shaft coupling
P10 = Parallel, 1:1 belt reduction
P20 = Parallel, 2:1 belt reduction

Always discuss your motor selection with your local sales representative.

GGG = Motor Mounting Dimension Code

NNN = None, base unit only

 

FTX095 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
68 60 16 48 5 GFA
75 60 16 48 5 GHA
165 130 28 60 8 IRB
165 130 32 58 10 IRC
165 130 32 50 10 IRD
145 110 28 63 8 JQA

 

FTX095 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
68 60 16 48 5 GFA
75 60 16 48 5 GHA
130 110 24 50 8 IPB
165 130 24 50 8 IRA
100 80 19 40 6 IMC
145 110 24 55 8 JQD

 


FTX125 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
120 90 32 88 10 G7A
200 114.3 42 113 10 JSD
215 130 32 60 10 ITE
215 180 38 80 10 ITF
215 180 42 82 12 IFG

 

FTX125 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
85 70 22 56 6 GIA
185 130 32 58 10 IRC
200 114.3 35 80 10 JSA

 


FTX160 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
120 90 32 88 10 G7A
130 110 32 68 10 GPA
165 130 40 112 12 GRA
215 180 38 80 10 ITF
235 200 55 116 16 JUA
265 230 42 110 12 IVC
265 230 55 110 16 JVA

 

FTX160 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
100 80 22 48 6 GMA
120 90 32 88 10 G7A
130 110 32 68 10 GPA
165 130 32 50 10 IRD
200 114.3 35 80 10 JSA
200 114.3 42 113 10 JSD
215 130 32 60 10 ITE
215 180 38 80 10 ITF
215 180 42 82 12 ITG
265 230 42 110 12 IVC

 


FTX215 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
215 160 55 112 16 GTA
265 230 42 110 12 IVC
265 230 60 140 18 JVC
300 250 48 112 14 IWA
300 250 60 140 18 JWA

 

FTX215 (Parallel – 2:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
165 130 40 112 12 GRA
215 180 38 80 10 ITF
265 230 38 110 10 IVB
265 230 42 110 12 IVC
M = Mounting Options

N = None
1 = Front Mounting Flange
5 = Rear Clevis1
7 = Rear Eye1
9 = Rear Trunnion

1= Not available with inline or NMT motor mount, contact your local sales representative.

N = Other Options

N = None

Resources

Certifications

See All Resource Material for the Tritex II and other products in our Resource Library

Login

Please log in or register to see the models and drawings.

Register

If you do not have a login, please proceed to the registration page

Register

If you currently have an Exlar website account and would like to delete it, please contact

CHA_Info@curtiss-wright.com

Privacy Notice

By giving us your contact information, you are giving consent to Curtiss-Wright / Exlar Automation to store your data and follow-up with you via email or phone.

At Curtiss-Wright, we promise to treat your data with respect and only share it with our representatives and distributors for the purpose outlined on the form. You can remove your request or information at any time by reaching out to our team at cha_info@curtisswright.com.

For further information on how we protect your information, please refer to our Privacy Notice.


Stay up to date

Get the latest Exlar product updates delivered directly to your inbox

You can change your mind at any time by clicking the unsubscribe link in the footer of any email you receive from us, or by contacting us at cha_info@curtisswright.com



Country *:
 Security code
 How we use this information