FTP Series

FTP Series

  • Maximum force up to 356 kN (80,000 lbf)
  • Speeds up to 401 mm/sec (15.8 in/sec)
  • Less maintenance and downtime
  • Programmable and accurate
Find a Distributor

Hydraulic Press Replacement

The FTP Series high force electric press actuators were designed to provide very high force in a small package making them an ideal alternative to hydraulic cylinders. Based on planetary roller screw technology, it offers force density not attainable with more common ball screw based electric actuators, up to 15X the life and 2X the force density in most cases.

Programmable and Accurate

Attaining any kind of accuracy with a traditional hydraulic solution requires complicated servo valves that are difficult to set up and need frequent adjustment for optimum performance. Once set, changeover to a different part or mode of operation is equally as troublesome. The all-electric FTP Series utilizes commonly understood servo motor technology, offering accuracy, control and flexibility not available with hydraulics.

Reliable and Efficient

The FTP Series high force electric press actuators allow machine builders to meet the ever-increasing performance demands of their customers while minimizing or eliminating the maintenance issues and downtime associated with traditional hydraulic solutions. Their programmability and flexibility significantly reduces changeover time between production runs enabling smaller batch sizes, and they consume 25% less energy than a typical hydraulic solution. Increase your operational efficiency today by switching to the FTP Series.

 

Quick Data

Models: FTP160, FTP215
Frame Sizes: 160 mm (6.3 in),  215 mm (8.5 in)
Screw Leads – mm (in) 12 (.50)
Stroke Lengths: 150, 300, 600 mm (5.9, 11.8, 23.6 in )
900 mm (35.4 in) only available on FTP160
Linear Speed: FTP160: 401 mm/sec (15.8 in/sec)
FTP215: 351 mm/sec (13.8 in/sec)
Maximum Force: FTP160: 200 kN (45,000 lbf)
FTP215: 356 kN (80,000 lbf)
Standards/Ratings: IP65S

Related Industries

Configuration Options

FTP Series Configuration Options

AAA = FTP Frame Size
BBBB = Stroke Length
CC = Screw Lead
D = Lubrication Type
E = Rod End Thread
FFF = Motor Mounting Configurations*
GGG = Motor Mounting Dimension Code
M = Mounting Options
N = Other Options

*Always discuss your motor selection with your local sales representative.

Mechanical Options

Adjustable External Travel Switche(s)

External travel switches indicate travel to the controller and are adjustable for either the home or end position.

Front Mounting Flange (Required)

Front mounting flange, includes thru-holes for face-mounting

* Some options are not available with every configuration. For options or specials not listed above or for extended temperature operation, please consult Exlar Applications Engineering.

IP Ratings for Exlar Actuators

FTP Series

FTP160
Performance Specifications
 Printable View

FTP160 Mechanical Specifications

    12
Screw Lead mm 12
  in 0.472
Maximum Force (Extension) kN 200.0
  lbf 45,000
Maximum Force (Retraction) kN 89
  lbf 20,000
Life at Maximum Force (Minimum) Press Cycles 3 Million
C_a (Dynamic Load rating) kN 290
  lbf 65,200
Maximum Input Torque Nm 472
  lbf-in 4,225
Max Rated RPM @ Input Shaft RPM 2,000
Maximum Linear Speed @ Maximum Rated RPM mm/sec 401
  in/sec 15.8
Friction Torque Nm 4.54
  lbf-in 40

* Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

 

FTP160 Weights

  kg lb
Base Actuator Weight (Zero Stroke) 56 124
Actuator Weight Adder (Per 25 mm of stroke) 1.73 3.8
Adder for Inline (excluding motor) 30.7 14.2
Adder for Parallel Drive (excluding motor) 117.8 53.1
Adder for Front Flange 41.7 19.0

 

FTP160 Inertias

Base Unit Inertia Zero Stroke [kg-m^2 (lbf-in-sec^2)] Add per 25 mm [kg-m^2 (lbf-in-sec^2)]  
12 mm Lead 1.35 x 10^-2 (1.20 x 10^-1) 2.58 x 10^-4 (2.28 x 10^-3)  
       
Inline Drive Inertia Inline Unit - w/Motor Coupling Inline Unit - w/Motor Coupling for Gearbox Mount Add per 25 mm
12 mm Lead 1.47 x 10^-2 (1.30 x 10^-1) 1.68 x 10^-2 (1.49 x 10^-1) 2.58 x 10^-4 (2.28 x 10^-3)
       
Parallel Drive Inertia 1:1 Reduction Add per 25 mm  
12 mm Lead (zero stroke) 5.28 x 10^-2 (4.67 x 10^-1) 2.58 x 10^-4 (2.28 x 10^-3)  
Estimated Life Time Curves
Ordering Guide
 Printable View

To order a product from Exlar, a unique model mask (identification number) is required. The model mask is a string of characters that identifies the model, size, and configuration alternatives.

 

 

Product Selection Guidelines

To facilitate your ordering process, feel free to print and complete this Exlar Application Worksheet, prior to contacting a Sales Representative in your area.

AAA = Frame Size

160 = 160 mm (6.3 in)
215 = 215 mm (8.5 in)

BBBB = Stroke Length

0150 = 150 mm
0300 = 300 mm
0600 = 600 mm
0900 = 900 mm (only available on the FTP160)

CC = Screw Lead

12 = 12 mm

D = Lubrication Type

2 = Oil

E = Rod End Thread

A = Male, metric thread
B = Female, metric thread

FFF = Gearbox Mounting Configurations

NMT = None, base unit only
N10 = Inline, includes shaft coupling
P10 = Parallel, 1:1 belt reduction

Always discuss your motor selection with your local sales representative.

GGG = Gearbox Mounting Dimension Code

NNN = None, base unit only

FTP160 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
165 130 40 112 12 GRA
165 130 40 97/102 12 GRC
215 160 55 112 16 GTA
215 160 55 105 16 GTB

 

FTP215 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
250 180 75 143 20 G8A
165 130 40 112 12 GRA
165 130 40 102 12 GRC
215 160 55 112 16 GTA
 
M = Mounting Options

1 = Front Mounting Flange (Required)

N = Other Options

N = None

FTP215
Performance Specifications
 Printable View

FTP215 Mechanical Specifications

    12
Screw Lead mm 12
  in 0.472
Maximum Force (Extension) kN 355.8
  lbf 80,000
Maximum Force (Retraction) kN 177.9
  lbf 40,000
Life at Maximum Force (Minimum) Press Cycles 1.6 Million
C_a (Dynamic Load rating) kN 423.5
  lbf 95,200
Maximum Input Torque Nm 850
  lbf-in 7,520
Max Rated RPM @ Input Shaft RPM 1,750
Maximum Linear Speed @ Maximum Rated RPM mm/sec 351
  in/sec 13.8
Friction Torque Nm 5.65
  lbf-in 50

* Maximum allowable actuator-generated force that can be applied routinely. Exceeding this force may result in permanent damage to the actuator. For high force, short stroke applications, consult factory.

 

FTP215 Weights

  kg lb
Base Actuator Weight (Zero Stroke) 127 280
Actuator Weight Adder (Per 25 mm of stroke) 2.7 5.96
Adder for Inline (excluding motor) 85.1 38.6
Adder for Parallel Drive (excluding motor) 137.3 62.3
Adder for Front Flange 102.5 46.5

 

FTP215 Inertias

Base Unit Inertia Zero Stroke [kg-m^2 (lbf-in-sec^2)] Add per 25 mm [kg-m^2 (lbf-in-sec^2)]  
12 mm Lead 4.26 x 10^-2 (3.77 x 10^-1) 8.02 x 10^-4 (7.10 x 10^-3)  
       
Inline Drive Inertia Inline Unit - w/Motor Coupling Inline Unit - w/Motor Coupling for Gearbox Mount Add per 25 mm
12 mm Lead 4.44 x 10^-2 (3.93 x 10^-1) 6.16 x 10^-2 (5.45 x 10^-1) 8.02 x 10^-4 (7.10 x 10^-3)
       
Parallel Drive Inertia 1:1 Reduction Add per 25 mm  
12 mm Lead (zero stroke) 9.43 x 10^-2 (8.34 x 10^-1) 8.02 x 10^-4 (7.10 x 10^-3)
 
 
Estimated Life Time Curves
Ordering Guide
 Printable View

To order a product from Exlar, a unique model mask (identification number) is required. The model mask is a string of characters that identifies the model, size, and configuration alternatives.

 

 

Product Selection Guidelines

To facilitate your ordering process, feel free to print and complete this Exlar Application Worksheet, prior to contacting a Sales Representative in your area.

AAA = Frame Size

160 = 160 mm (6.3 in)
215 = 215 mm (8.5 in)

BBBB = Stroke Length

0150 = 150 mm
0300 = 300 mm
0600 = 600 mm
0900 = 900 mm (only available on the FTP160)

CC = Screw Lead

12 = 12 mm

D = Lubrication Type

2 = Oil

E = Rod End Thread

A = Male, metric thread
B = Female, metric thread

FFF = Gearbox Mounting Configurations

NMT = None, base unit only
N10 = Inline, includes shaft coupling
P10 = Parallel, 1:1 belt reduction

Always discuss your motor selection with your local sales representative.

GGG = Gearbox Mounting Dimension Code

NNN = None, base unit only

FTP160 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
165 130 40 112 12 GRA
165 130 40 97/102 12 GRC
215 160 55 112 16 GTA
215 160 55 105 16 GTB

 

FTP215 (Inline or Parallel – 1:1)

Bolt Circle Diameter
(mm)
Pilot
Diameter
(mm)
Shaft
Diameter
(mm)
Shaft
Length
(mm)
Key Width (mm) Motor Mount Code
250 180 75 143 20 G8A
165 130 40 112 12 GRA
165 130 40 102 12 GRC
215 160 55 112 16 GTA
 
M = Mounting Options

1 = Front Mounting Flange (Required)

N = Other Options

N = None

Resources

Certifications

See All Resource Material for the Tritex II and other products in our Resource Library

Login

Please log in or register to see the models and drawings.

Register

If you do not have a login, please proceed to the registration page

Register

If you currently have an Exlar website account and would like to delete it, please contact

CHA_Info@curtiss-wright.com

Privacy Notice

By giving us your contact information, you are giving consent to Curtiss-Wright / Exlar Automation to store your data and follow-up with you via email or phone.

At Curtiss-Wright, we promise to treat your data with respect and only share it with our representatives and distributors for the purpose outlined on the form. You can remove your request or information at any time by reaching out to our team at cha_info@curtisswright.com.

For further information on how we protect your information, please refer to our Privacy Notice.


Stay up to date

Get the latest Exlar product updates delivered directly to your inbox

You can change your mind at any time by clicking the unsubscribe link in the footer of any email you receive from us, or by contacting us at cha_info@curtisswright.com



Country *:
 Security code
 How we use this information